Ejector Rods

45-EJRD

HB45 Ejector Rod

HB45 Ejector Rods are hardened and precision ground to +/-0.005mm when required. Designed to suit the collet system and part requirements they can be designed to be used without ejector heads and with the anti-rotation feature on the ejector rod, or the ejector head

  • CP Part #: RH45-EJRD-XXXX
  • OEM #: NA
32 45-EJRD

HB32/45 Ejector Rod

HB32/45 Ejector Rods are hardened and precision ground to +/-0.005mm when required. Designed to suit the collet system and part requirements they can be designed to be used without ejector heads and with the anti-rotation feature on the ejector rod, or the ejector head

  • CP Part #: RH32-45-EJRD-XXXX
  • OEM #: NA
RH25-EJRD

HW25 Ejector Rod

HW25 Ejector Rods are hardened and precision ground to +/-0.005mm when required. Designed to suit the collet system and part requirements they can be designed to be used without ejector heads and with the anti-rotation feature on the ejector rod, or the ejector head

  • CP Part #: RH25-EJRD-XXXX
  • OEM #: NA
RH20-EJRD

Pro20 Ejector Rod

Pro20 Ejector Rods are hardened and precision ground to +/-0.005mm when required. Designed to suit the collet system and part requirements they can be designed to be used without ejector heads and with the anti-rotation feature on the ejector rod, or the ejector head.

  • CP Part #: RH20-EJRD-XXXX
  • OEM #: NA
45 Sleeve Collet EJRD

HB45 Sliding Sleeve Ejector Assembly

HB45 sliding sleeve ejector assembly designed to suit machine type and application. Used with sliding sleeve collets, this system eliminates the disadvantages of step collets and is also used to hold parts with geometry that is not suitable for standard collet work holding.

  • CP Part #: Part Specific
  • OEM #: NA
32 45 Sleeve Collet EJRD

HB32/45 sliding sleeve ejector assembly

HB32/45 sliding sleeve ejector assembly designed to suit machine type and application. Used with sliding sleeve collets, this system eliminates the disadvantages of step collets and is also used to hold parts with geometry that is not suitable for standard collet work holding.

  • CP Part #: Part Specific
  • OEM #: NA
25 Sleeve

HW25 Sliding Sleeve Ejector Assembly

HW25 sliding sleeve ejector assembly designed to suit machine type and application. Used with sliding sleeve collets, this system eliminates the disadvantages of step collets and is also used to hold parts with geometry that is not suitable for standard collet work holding.

  • CP Part #: Part Specific
  • OEM #: NA