Ejector Sleeves

Spring

Ejector Sleeve Springs

Standard and custom length ejector sleeve springs for HW25, HB32, HB32/45 and HB45.

  • CP Part #: Varies
  • OEM #: NA
RH45-SPAC-1000

Ejector Sleeve Steel Stop Bushing

Steel ejector sleeve stop bushings for HW25, HB32/45 and HB45 Long. Standard designs, and designs to match collet system and part position requirements.

  • CP Part #: Varies
  • OEM #: NA
RH45-SPAC- 1000N

Ejector Sleeve Plastic Stop Bushing

Plastic ejector sleeve stop bushings for HB32/45, HB45 Long, and HB45 Short ejector sleeves.

  • CP Part #: Varies
  • OEM #: NA
RH45-EJSL-1002

HB45 Ejector Sleeve – Short

HB45 ejector sleeves are designed to prevent ejector rod rotation and stop the ejector rod at ejection.

  • CP Part #: RH45-EJSL-1002
  • OEM #:
HB 45 Ejector Sleeve

HB45 Ejector Sleeve – Long

HB45 ejector sleeves are designed to prevent ejector rod rotation and stop the ejector rod at ejection. Along with standard designs, ejector sleeves can be custom made to increase clamping depth, limit ejector rod anti-rotation accuracy, and improve center line accuracy.

  • CP Part #: RH45-EJSL-1001
  • OEM #:
RH32-45-EJSL

HB32/45 Ejector Sleeve

HB32/45 ejector sleeves are designed to prevent ejector rod rotation and stop the ejector rod at ejection. Along with standard designs, ejector sleeves can be custom made to increase clamping depth, limit ejector rod anti-rotation accuracy, and improve center line accuracy. NOTE the HB32 collets use the same sleeve.

  • CP Part #: RH32-45-ELSL-1001
  • OEM #: Unknown
RH25-EJSL

HW25 Ejector Sleeve

HW25 ejector sleeves are designed to prevent ejector rod rotation and stop the ejector rod at ejection. Along with standard designs, ejector sleeves can be custom made to increase clamping depth, limit ejector rod anti-rotation accuracy, and improve center line accuracy.

  • CP Part #: RH25-EJSL-1001
  • OEM #: 5.03.155
RH20-EJSL

Pro20 Ejector Sleeve

Pro20 ejector sleeves are designed to prevent ejector rod rotation and stop the ejector rod at ejection. Along with standard designs, ejector sleeves can be custom made to increase clamping depth, limit ejector rod anti-rotation accuracy, and improve center line accuracy.

  • CP Part #: RH20-EJSL-1001
  • OEM #: